The equipment is suitable for leveling high-strength composite explosive plates, titanium plates, stainless steel plates, nickel alloys, copper plates, steel plates and other plates.
    The allowable working environment temperature for the machine is -5~50 ℃; Power electric 380V three-phase five wire system, voltage fluctuation range 380V ± 10%, 50HZ ± 1HZ; relative humidity:<90%, no condensation; The daily working hours are ≥ 16 hours.

Feature 1: The feeding side of the equipment is equipped with a pinch roller device, which has the function of carrying material and pressing down, allowing for initial leveling of large deformation explosive plates, making feeding easier, and ensuring the leveling accuracy at both ends of the plate.

Feature 2: Monotonic technology for upper rollers, with more parallel, inclined, and V-shaped adjustment methods for upper rollers, convenient feeding, each upper roller can apply large deformation force, high leveling accuracy, and good stress equalization effect on the sheet metal.

Feature 3: The working roller drive part of the leveling machine is divided into two groups, front and rear, each group is equipped with an independent power unit. Each power unit is sequentially connected and driven by a main motor, coupling, reducer, and gear distribution box, which respectively drive the front and rear sets of work rolls. Therefore, the service life of the work rolls and transmission components is greatly extended, the transmission efficiency is improved, and the operating and maintenance costs are reduced.

Feature 4: Adopting a quadruple high-precision roller system, the roller system has high precision and high leveling accuracy; Multiple sets of supporting rollers are installed on the work roll to ensure the rigidity of the roll system; The material of the work roll is selected as high-strength alloy material 60CrMoV, forged, quenched and tempered, and surface quenched, with a hardness of HRC60~65 and good wear resistance and impact resistance; Each set of supporting rollers can be independently adjusted in height up and down, while ensuring good contact for the working roller system after long-term use or grinding.

Feature 5: The lubrication system of this machine adopts an electric dry oil lubrication pump, which lubricates each lubrication point through an oil separator and pipeline. Each lubrication point is equipped with an intelligent sensor. When the oil circuit is blocked or the lubrication point is blocked, there is an alarm device on the control panel, which can quickly and clearly know which point is faulty. And it is automatically controlled by the CNC system and can collect information. It has functions such as oil blockage alarm, oil shortage alarm, and oil shortage pre tightening shutdown.