Because some companies need to meet the market needs of the punching machine without shutting down for 24 hours, it also makes the punching machine endure the test. If the EDM puncher does not pay attention to maintenance at this time, the machine will soon have problems, and the service life of the puncher will be greatly reduced. Let me introduce to you how to maintain the piercing machine. If you maintain it according to the following methods, the probability of failure of the piercing machine will be greatly reduced.

So how do we focus on maintenance and maintenance?

1. The water pump of the perforator is regularly maintained with lubricating oil, because the long-term operation of the water pump will cause the pump pressure to be too high. If the maintenance is not carried out for a long time, the water pump will be stuck or the water pump will be damaged. The water pump is a very important part of the piercing machine. If there is a problem with the water pump, the whole piercing machine will be affected. We have been receiving feedback from customers that the pump is not working, it must be because the pump has not been maintained for a long time.

3. Some parts of the piercing machine need to be added with lubricating oil or rail oil as required. Nowadays, the development of piercing machine is very rapid, and it has been popularized in precision mold processing. Among them, as auxiliary equipment for wire EDM, the general purpose is to thread holes, chemical fiber spinnerets, air passage holes, etc. These methods are suitable for A variety of metal materials, and the processing of super-hard electrical conductor materials such as initial holes, nozzle holes, filter holes, pores and other fine holes, and ultra-deep holes are also widely used.